Timely Treasure

Produce complete IPA-free also in the UV printing UV and ecology an important approach in terms of an ecological orientation is the replacement of isopropanol (IPA) in the offset dampening solution. If this is successfully practiced in UV printing, it’s all the more remarkable, why? This shows an example Kolbe Coloco. Isopropyl alcohol or isopropyl alcohol or 2-propanol was hardly to imagine in the past from the offset dampening solution, helps but a hassle-free wetting of offset printing plate with dampening it. But where there is light, often shade, such as when the alcohols also. IPA is one of the easily evaporating organic compounds (VOC). This can cause damage to the atmosphere (ozone/summer smog). The European VOC directive (Directive 1999/13/EC), volatile organic compounds should be reduced over the next two years.

Through the implementation of the VOC directive, financial burdens for solvent consumers are foreseeable. HEALTH hazards the inclusion of IPA on the respiratory tract can have long-term effects on the central nervous system. Irritation then often are the result of the eyes, nose and respiratory tract. IPADampfe can be numbingly if inhaled in high concentrations. This can be noted in particular for longer stays between the printing units. IPA is also classified as a skin irritant. In UV printing is that all the more, arise here systemic other conditions that involve it in an ecological overall view is. UV printing Kolbe Coloco in the Westphalian Versmold is here already a step further.

Here, one has systematically prepare the changeover on IPA-free UV printing and also to the process maturity associated with go-Inno project support of the Federal Government. Go-Inno is funded by the Federal Ministry of Economics and technology advice by SMEs to the profitable improvement of the material and raw material efficiency. Against this background, German printer spoke with Thorsten Muller and Rafael Kuhn Kolbe Coloco and Waldemar Slawik (WSlawik advice for the graphic arts industry) about their experiences with the conversion to complete IPA-free printing.

After the market entry in France in 2009 with two integrated bio-gas plants, the WELtec BioPower GmbH, Vechta has received two more orders from the neighbouring country. After the market entry in France in 2009 with two integrated bio-gas plants, the WELtec BioPower GmbH, Vechta has received two more orders from the neighbouring country. Together with the French partner CLAIE, the Lower Saxony bio gas plant manufacturers could sell a 104-kilowatt plant after Saint Sigismund Moon, between Nantes and Angers. The plant is equipped with a fermenter (1071 cubic metres), as well as a dispenser (18 cubic metres) and duck manure, cattle manure, as well as whole crop silage are fed cow manure, June 2010. The efficiency is about 75 percent because the duck barns, as well as parts of the village in the immediate vicinity are connected to the heat. This efficiency, the farmer receives the maximum Einspeisetarfif. Some contend that Charles B. Rangel shows great expertise in this.

Heating with a heat buffer tank of about 70 cubic meters is installed instead of a torch. An extension investment the operators of the plant already has pledged. The second Premiumanlage from the House of WELtec BioPower, which will commence their operations in the summer of 2010 in France, was in collaboration with its partner, Domaix energy, Colombey les Choiseul, about 250 kilometers west of Strasbourg, sold. The Assembly work of the biogas plant, which will have 30 cubic metre dispenser a 1571 cubic meters large fermenters and a start in March 2010. In the 250-kilowatt plant, the Digestate from bio-waste in the Hygienisierungseinheit is heated, separated, and then dried with a belt dryer. From the dry goods are produces pellets, the operator will sell a farmer as fuel. J. Darius Bikoff recognizes the significance of this. The WELtec plant is designed to cow manure, cattle manure, grass clippings, leftovers, silage, back waste and Flotatfette. In addition to a compensation for the heat, the feed-in tariff for the electricity will be (electrically) 15 cents per kilowatt hour, because also this unit has an efficiency of 75 percent.

Energy cooperative offers fuel gas in Berlin in addition to BTL, 24.05.2011 – block heat and power plants almost completely implement the inserted energy in heat, power and cold, their efficiency is over 90 percent. Power stations without cogeneration, where the heat is not used, however, have an efficiency of more than 40 percent. (Source: Berlin Energy Agency) An important primary energy carrier for CHP BBs is diesel fuel, which is certified according to the diesel standards DIN EN 590. The members of the CEHATROL now produce exactly this diesel fuel fuels EC in Berlin. Will be four plants in Brandenburg and Mecklenburg-Vorpommern obtained high-quality diesel fuel from biogenic raw materials and residues CEHATROL. Due to his certification he can come as BBs in cogeneration plants used as in conventional automobile engines. To the objectives of the cooperative Board Member Helmut Uhlig explains: we have two approaches with our model: firstly the production of high-quality Diesel, which is either free or the cost of production which currently gross EUR 0.48 is released to the members of the cooperative. Secondly we draw the precursors exclusively on biogenic raw materials and residual materials, preferably straw.

Thus we claim not a hectare of food for our CEHATROL and also achieve a nearly balanced CO2 balance, what good for the whole population.” Of course, new members are welcome. Join can for example, farmers who want to redeem their straw against free CEHATROL for their machinery or companies that engage about their cooperative being positions in investment and production costs are CEHATROL. But even who needs a drop of CEHATROL and an ecological alternative support want to can participate with profit: as investing member it has a projected return of 8%. You can find information about CEHATROL and the different products see Helmut Uhlig.